LFT-D PA6 긴 탄소 섬유 수정 플라스틱 고인성 강도 12mm 샘플 사용 가능

What is PA6?

Nylon6 (PA6), also known as polyamide 6, English name: Polyamide6 or Nylon6, PA6 for short; That is, polycaprolactam, obtained from caprolactam ring-opening polycondensation. It is translucent or opaque opalescent resin, with superior mechanical properties, stiffness, toughness, wear resistance and mechanical shock absorption, good insulation and chemical resistance. Widely used in automotive parts, electronic and electrical parts and other fields.

What are the advantages and disadvantages of PA6?

Main advantages of PA:

1. High mechanical strength, good toughness, high tensile and compressive strength.

2. outstanding fatigue resistance, parts after repeated bending can still maintain the original mechanical strength.

3. high softening point, heat resistant.

4. smooth surface, small friction coefficient, wear-resistant.

5. corrosion resistance, very alkali and most salts, also resistant to weak acid, oil, gasoline, aromatic compounds and general solvents, aromatic compounds are inert, but not resistant to strong acids and oxidants.

6. with self-extinguishing, non-toxic, odorless, good weather resistance.

7. Excellent electrical performance. Good electrical insulation, nylon volume resistance is high, high breakdown voltage resistance, in dry environment, can be used as power frequency insulation material, even in high humidity environment still has good electrical insulation.

8. light weight, easy to dye, easy to form.

Main disadvantages of PA:

1. easy to absorb water. High water absorption, saturated water can reach more than 3%. The dimensional stability and electrical properties are affected to some extent, especially the thickening of thin-walled parts. Water absorption also greatly reduces the mechanical strength of plastics.

2. Poor light resistance. In a long-term high temperature environment, it will oxidize with oxygen in the air, turn brown at the beginning, and then break and crack.

3. injection molding technology requirements are more strict: the existence of trace moisture will cause great damage to the quality of molding; The dimensional stability of the product is difficult to control because of thermal expansion. The existence of sharp Angle in the product will lead to stress concentration and reduce the mechanical strength; If the wall thickness is not uniform, it will lead to the distortion and deformation of the parts. High precision of equipment is required in post-processing.

4. will absorb water, alcohol and swelling, not resistant to strong acid and oxidant, can not be used as acid-resistant materials.

There are many advantages of PA6, but also many disadvantages, these disadvantages limit the play of the advantages, so people thought of modifying methods to enhance its application.

What is the Long Carbon Fiber reinforced PA6?

Long carbon fiber reinforced composites offer significant weight savings and provide optimum strength and stiffness properties in reinforced thermoplastics. The excellent mechanical properties of long carbon fiber reinforced composites make it an ideal replacement for metals. Combined with the design and manufacturing advantages of injection molded thermoplastics, long carbon fiber composites simplify the re-imagining of components and equipment with demanding performance requirements. Its widespread use in aerospace and other advanced industries make it a "high-tech" perception of consumers - you can use it to market products and create differentiation from competitors.

What is the differences between Long Carbon Fiber and Short Carbon Fiber?

Compared with the short fiber, it has more excellent performance in mechanical properties. It is more suitable for large products and structural parts. It has 1-3 times higher (toughness) than short fiber, and the tensile strength (strength and rigidity) is increased by 0.5-1 times.

TDS for reference only

Application cases

Product details

Frequently asked questions

1. The product is easy to brittle, so changing to use long fiber reinforced thermoplastic materials can solve this problem?

A: 전반적인 기계적 특성을 개선해야 합니다. 긴 유리 섬유와 긴 탄소 섬유의 특성은 기계적 특성의 장점입니다. 단섬유보다 1~3배(인성) 높으며, 인장강도(강도 및 강성)는 0.5~1배 증가합니다.

2. 긴 탄소 섬유 사출 성형 제품의 특별한 진행 요구 사항이 있습니까?

A: 사출 성형기 나사 노즐, 금형 구조 및 사출 성형 공정에 대한 긴 탄소 섬유의 요구 사항을 고려해야 합니다. 긴 탄소 섬유는 상대적으로 비용이 많이 드는 재료이므로 선택 과정에서 비용 성능 문제를 평가해야 합니다.

3. 장 섬유 제품의 비용이 더 높습니다. 재활용 가치가 높습니까?

A: 열가소성 LFT 장섬유 소재는 재활용 및 재사용이 가능합니다.