MXD6 수정은 고온의 수정 나일론 소재입니다.

MXD6 수지 공장도 가격 mxd6 과립 펠렛 어느 하나에 해결할 공장도 있습니다.

MXD6 injection machine fiber glass mxd6 granules polymer which one is made in ourself factory.

높은 배리어 나일론 소재 MXD6 유리 섬유를 채우는 것

MXD6 사출 기계 섬유 유리 MXD6 하나가 제작 된 과립 폴리머 공장.

MXD6 사출 기계 섬유 유리 MXD6 하나가 제작 된 과립 폴리머 공장.

MXD6 Polyadipyl-m-benzoylamine, abbreviated as mxd6, resin has higher mechanical strength and modulus than other engineering plastics, is also a special high barrier nylon material. Although the barrier of mxd6 is slightly worse than that of pvdc and evoh, its barrier is not affected by temperature and humidity, which is especially suitable for high temperature and humid occasions. In today's barrier packaging and plastic instead of steel general trend, nylon mxd6 has become one of the most eye-catching new plastic varieties. Structure performance: MXD6 nylon material has high strength, high rigidity, high thermal deformation temperature, small thermal expansion coefficient; Dimensional stability, low water absorption rate and small size change after water absorption, mechanical strength changes less; Forming shrinkage is small, suitable for precision forming processing; Excellent coating performance, especially suitable for high temperature surface coating; Excellent barrier to oxygen, carbon dioxide and other gases. Excellent mechanical and thermal properties and high strength, high modulus and heat resistance, high barrier, excellent cooking resistance. MXD6-LGF MXD6 can be compounded with glass fiber for use in fiberglass reinforced materials containing 50-60% glass fiber for exceptional strength and stiffness. Even when filled with high glass content, its smooth, resin-rich surface produces a fibre-free high gloss surface, ideal for painting, metal-plating, or creating naturally reflective shells. 1, suitable for high liquidity of thin wall It is a very fluid resin that can easily fill thin walls as thin as 0.5 mm thick even when the glass fiber content is as high as 60%. 2. Excellent surface finish A resin-rich perfect surface has a highly polished appearance, even with a high glass fiber content. 3. High strength and stiffness The tensile and flexural strength of MXD6 is similar to that of many cast metals and alloys with the addition of 50-60% glass fiber reinforced material. 4, good dimensional stability At ambient temperatures, the linear expansion coefficient (CLTE) of MXD6 glass fiber composites is similar to that of many cast metals and alloys. Strong reproducibility due to low shrinkage and the ability to maintain tight tolerances (length tolerances as low as ± 0.05% if properly formed). MXD6 replaces metal to produce high-quality structural parts for automobiles, electronics and electrical appliances In automobile parts, many occasions require material products with high mechanical strength and good oil resistance, and can be used in the range of 120 ~ 160℃ for a long time. Glass fiber reinforced MXD6 heat resistant temperature up to 225℃, high rate of strength retention at high temperature, can be used in the cylinder block, cylinder head, piston, synchronous gear, etc. MXD6/PPO alloy has high temperature resistance, high strength, oil resistance, wear resistance, good dimensional stability and other properties, can be used for the vertical outer plate of the automobile body, front and rear fenders, wheel covers and almost can not use steel plate stamping forming curved parts and automobile chassis. Datasheet for reference Application fileds Production process Xiamen LFT composite plastic Co., Ltd Q. How to choose the fiber content of the product? Is the larger product suitable for higher fiber content material? A. This is not absolute. The content of glass fiber is not more is better. The suitable content is just to meet the requirements of each products. Q. Under what circumstances can long fiber replace short fiber? What are the common alternative materials? A. Traditional staple fiber materials can be replaced with long glass fiber and long carbon fiber LFT materials in the case of customers whose mechanical properties cannot be met or where higher metal substitutes are desired. For example, PP long glass fiber is often replacing nylon reinforced glass fiber, and nylon long glass fiber is replacing PPS series. Q. Does long glass fiber and long carbon fiber injection have special requirements for injection molding machines and molds? A. There are certainly requirements. Especially from the product design structure, as well as the injection molding machine screw nozzle and mold structure injection molding process must consider the requirements of long fiber.

MXD6 Polyadipyl-m-benzoylamine, referred to as mxd6, generally referred to as "nylon mxd6", resin than other engineering plastics have higher mechanical strength and modulus, is also a special high barrier nylon material. Although the barrier of mxd6 is slightly worse than that of pvdc and evoh, its barrier is not affected by temperature and humidity, which is especially suitable for high temperature and humid occasions. In today's barrier packaging and plastic instead of steel general trend, nylon mxd6 has become one of the most eye-catching new plastic varieties. Structure performance: PA MXD6 nylon material has high strength, high rigidity, high thermal deformation temperature, small thermal expansion coefficient; Dimensional stability, low water absorption rate and small size change after water absorption, mechanical strength changes less; Forming shrinkage is small, suitable for precision forming processing; Excellent coating performance, especially suitable for high temperature surface coating; Excellent barrier to oxygen, carbon dioxide and other gases. Excellent mechanical and thermal properties and high strength, high modulus and heat resistance, high barrier, excellent cooking resistance Advantages 1、Maintain high strength and rigidity in a wide temperature range 2、High heat deflection temperature, small coefficient of thermal expansion 3、Low water absorption, small size change after water absorption, less mechanical strength reduction 4、Small shrinkage rate of molding, suitable for precision molding process 5、Excellent paintability, especially suitable for surface painting under high temperature 6、Excellent barrier to oxygen, carbon dioxide and other gases MXD6-LGF MXD6 applications in the plastics modification industry MXD6 can be compounded with glass fibers, carbon fibers, minerals and/or advanced fillers for materials containing 50-60% glass fiber reinforcement with exceptional strength and stiffness. Even when filled with high levels of glass fiber, its smooth, resin-rich surface creates a high gloss finish like no glass fiber, making it ideal for painting, metal coating or creating naturally reflective housings. 1、High fluidity for thin wall It is a very high flowing resin that can easily fill thin walls as thin as 0.5 mm thick even with glass fiber content as high as 60%. 2、Excellent surface finish The resin-rich perfect surface has a highly polished appearance, even with a high glass fiber content. 3、Very high strength and stiffness MXD6 with 50-60% glass fiber reinforcement has a tensile and flexural strength similar to many cast metals and alloys. 4、Good dimensional stability At ambient temperature, the coefficient of linear expansion (CLTE) of MXD6 glass fiber composite is similar to that of many cast metals and alloys. It is highly reproducible due to low shrinkage and the ability to maintain tight tolerances (length tolerances can be as low as ± 0.05% if properly formed). 참조용 TDS 애플리케이션 MXD6는 금속을 대체하여 자동차, 전자 제품 및 전기 제품의 고품질 구조 부품을 만듭니다. 자동차 부품에서는 기계적 강도가 높고 내유성이 좋은 소재 제품이 필요한 경우가 많으며 120~160℃ 범위에서 장기간 사용할 수 있습니다. 유리섬유가 강화된 MXD6는 225℃까지의 내열성과 고온에서 높은 강도 유지율을 가지고 있어 자동차 엔진의 실린더 블록, 실린더 헤드, 피스톤, 동기 기어 등에 사용할 수 있습니다. MXD6/PPO 합금은 고온 저항, 고강도, 내유성, 내마모성, 우수한 치수 안정성 등의 특성을 가지고 있습니다. 자동차 차체의 수직 외부 패널, 앞뒤 펜더, 휠 커버에 사용할 수 있으며 스탬핑 및 성형이 거의 불가능합니다. 강판. 자동차의 곡선 부품 및 섀시. 회사 소개

MXD6 introduction Polyhexanediyl m-dimethylamine, referred to in English as mxd6, generally referred to as "nylon mxd6", the resin has higher mechanical strength and modulus than other engineering plastics, but also a special high barrier nylon material. Nylon mxd6 is one of aromatic and aliphatic polyacyl limbs, which is produced by m-phenylenedimethylamine and adipic acid. In industrial production, in order to make the raw materials economical and easy to obtain, often mixed xylene as raw materials, first made of m-phenylene dimethylamine content higher than 70% of mixed benzene dimethylamine, and then with adipic acid to generate salt, in the presence of a small amount of stabilizer adipic acid and appropriate amount of water for the pressure condensation reaction, the resulting polymer is a hybrid. Although the barrier property of mxd6 is a little less than that of pvdc and evoh, its barrier property is not affected by temperature and humidity, which is especially suitable for high temperature and humid occasions. In today's barrier packaging and the general trend to replace steel with plastic, nylon mxd6 has become one of the striking new plastic varieties. Advantages 1、Maintain high strength and rigidity in a wide temperature range 2、High heat deflection temperature, small coefficient of thermal expansion 3、Low water absorption, small size change after water absorption, less mechanical strength reduction 4、Small shrinkage rate of molding, suitable for precision molding process 5、Excellent paintability, especially suitable for surface painting under high temperature 6、Excellent barrier to oxygen, carbon dioxide and other gases Long glass fiber compounds Long glass fiber reinforced composites can solve your problems when other methods of reinforced plastics do not provide the performance you need or if you want to replace metal with plastic. Long glass fiber reinforced composites can cost-effectively reduce the cost of goods and effectively improve the mechanical properties of engineering polymers, and increase the durability by forming long fibers to form a long-fiber-reinforced internal skeleton network. Application MXD6 can be filled with glass fibers to create a glass fiber reinforced material containing 20-60% glass fiber with exceptional strength and stiffness. Even when filled with high levels of glass fiber, its smooth, resin-rich surface creates a high gloss surface as without glass fiber, making it ideal for painting, metal coating or creating naturally reflective housings. 1、High fluidity for thin wall It is a very high flowing resin that can easily fill thin walls as thin as 0.5 mm in thickness even when the glass fiber content is as high as 60%. 2、Excellent surface finish The resin-rich perfect surface has a highly polished appearance, even with a high glass fiber content. 3、Very high strength and stiffness With 50-60% glass fiber reinforcement, MXD6 has tensile and flexural strengths similar to many cast metals and alloys. 4、Good dimensional stability At ambient temperature, the coefficient of linear expansion (CLTE) of MXD6 glass fiber composite is similar to that of many cast metals and alloys. It is highly reproducible due to low shrinkage and the ability to maintain tight tolerances (length tolerances can be as low as ± 0.05% if properly formed). MXD6 replaces metal in the production of high-quality structural parts for automobiles, electronics, and appliances In automotive parts, many occasions require material products with high mechanical strength and good oil resistance, and can be used in the range of 120 ~ 160 ℃ for a long time. Glass fiber reinforced MXD6 has a heat resistance of up to 225°C and high strength retention at high temperatures, and can be used in cylinder blocks, cylinder heads, pistons, timing gears, etc. of automobile engines. MXD6/PPO alloy has the properties of high temperature resistance, high strength, oil resistance, wear resistance, good dimensional stability, etc. It can be used for vertical outer panels of automobile bodies, front and rear fenders, wheel covers and curved parts that can hardly be formed by stamping with steel plates and automobile chassis. TDS foryour reference Certifications Quality Management System ISO9001/1949 Certification 국립 연구소 인정 인증서 수정된 플라스틱 혁신 기업 명예 증서 중금속 REACH 및 ROHS 테스트 Xiamen LFT 복합 플라스틱 Co., Ltd. Xiamen LFT composite plastic Co., Ltd는 LFT&LFRT에 중점을 둔 브랜드 회사입니다. 긴 유리 섬유 시리즈(LGF) 및 긴 탄소 섬유 시리즈(LCF). 이 회사의 열가소성 LFT는 LFT-G 사출 성형 및 압출에 사용할 수 있으며 LFT-D 성형에도 사용할 수 있습니다. 그것은 고객 요구에 따라 생성될 수 있습니다: 길이 5~25mm. 회사의 지속적인 침투 강화 열가소성 플라스틱은 ISO9001&16949 시스템 인증을 통과했으며 제품은 많은 국가 상표 및

MXD6 mxd6으로 약칭되는 폴리아디필-m-벤조일아민 수지는 다른 엔지니어링 플라스틱보다 기계적 강도와 모듈러스가 더 높으며 특수한 고차단 나일론 소재이기도 합니다. mxd6의 장벽은 pvdc 및 evoh보다 약간 나쁘지만 장벽은 온도와 습도의 영향을 받지 않으므로 특히 고온 다습한 경우에 적합합니다. 오늘날의 장벽 포장 및 강철 대신 플라스틱 일반 추세에서 나일론 mxd6은 가장 눈길을 끄는 새로운 플라스틱 품종 중 하나가 되었습니다. 구조 성능: MXD6 나일론 소재는 강도가 높고 강성이 높으며 열 변형 온도가 높고 열팽창 계수가 작습니다. 치수 안정성, 낮은 흡수율 및 흡수 후 크기 변화가 적고 기계적 강도 변화가 적습니다. 성형 수축이 작아 정밀 성형 가공에 적합합니다. 우수한 코팅 성능, 특히 고온 표면 코팅에 적합합니다. 산소, 이산화탄소 및 기타 가스에 대한 탁월한 차단력. 기계적, 열적 특성이 우수하고 강도가 높고, 모듈러스와 내열성이 높으며, 차단성이 높고, 조리성이 우수합니다. MXD6-LGF MXD6은 탁월한 강도와 강성을 위해 50-60%의 유리 섬유를 함유한 유리 섬유 강화 소재에 사용하기 위해 유리 섬유와 혼합할 수 있습니다. 높은 유리 함량으로 채워진 경우에도 매끄럽고 수지가 풍부한 표면은 섬유가 없는 고광택 표면을 생성하므로 페인팅, 금속 도금 또는 자연적으로 반사되는 쉘을 만드는 데 이상적입니다. 1. 얇은 벽의 높은 유동성에 적합 유리섬유 함량이 60%에 달해도 두께 0.5mm의 얇은 벽을 쉽게 채울 수 있는 유동성이 뛰어난 수지입니다. 2. 뛰어난 표면조도 수지 가 풍부한 완벽한 표면은 유리섬유 함량이 높아도 고광택 외관을 자랑합니다. 3. 높은 강도 및 강성 MXD6의 인장 및 굴곡 강도는 50-60% 유리 섬유 강화 소재를 추가한 많은 주조 금속 및 합금의 강도와 유사합니다. 4. 우수한 치수 안정성 주변 온도에서 MXD6 유리 섬유 복합재의 선팽창 계수(CLTE)는 많은 주조 금속 및 합금의 선팽창 계수와 유사합니다. 낮은 수축률과 엄격한 공차 유지 능력으로 인한 강력한 재현성(올바르게 성형된 경우 길이 공차는 ± 0.05%만큼 낮음) MXD6는 금속을 대체하여 자동차, 전자, 가전제품의 고품질 구조부품을 생산합니다 . 자동차 부품에는 높은 기계적 강도와 내유성이 우수한 소재 제품이 요구되는 경우가 많으며, 120~160℃ 범위에서 장기간 사용이 가능합니다. 시간. 유리 섬유 강화 MXD6 내열 온도 최대 225℃, 고온에서 높은 강도 유지율, 실린더 블록, 실린더 헤드, 피스톤, 동기 기어 등에 사용할 수 있습니다. MXD6/PPO 합금은 고온 저항, 고강도를 갖습니다. , 내유성, 내마모성, 우수한 치수 안정성 및 기타 특성은 자동차 차체의 수직 외부 플레이트, 전면 및 후면 펜더, 휠 커버에 사용할 수 있으며 곡선 부품 및 자동차 섀시를 형성하는 강판 스탬핑은 거의 사용할 수 없습니다. 참고용 데이터시트 신청서 제출 생산 과정 샤먼 LFT 복합 플라스틱 유한 공사 Q. 제품의 섬유질 함량은 어떻게 선택하나요? 더 큰 제품이 섬유 함량이 높은 소재에 적합합니까? A. 절대적인 것은 아닙니다. 유리섬유 함량이 높을수록 좋습니다. 적합한 콘텐츠는 각 제품의 요구 사항을 충족하는 것입니다. Q. 어떤 상황에서 장섬유가 단섬유를 대체할 수 있나요? 일반적인 대체 재료는 무엇입니까? A. 기계적 특성을 충족할 수 없거나 더 높은 수준의 금속 대체재를 원하는 고객의 경우 기존 스테이플 섬유 재료를 긴 유리 섬유 및 긴 탄소 섬유 LFT 재료로 대체할 수 있습니다. 예를 들어, PP 장유리섬유는 나일론 강화 유리섬유를 대체하는 경우가 많으며, 나일론 장유리섬유는 PPS 시리즈를 대체하고 있습니다. Q. 장유리섬유와 장탄소섬유 사출에는 사출성형기 및 금형에 대한 특별한 요구사항이 있나요? A. 반드시 요구사항이 있습니다. 특히 제품 설계 구조뿐만 아니라 사출 성형기의 스크류 노즐 및 금형 구조 사출 성형 공정에서도 장섬유의 요구 사항을 고려해야 합니다.

긴 유리 섬유 화합물 펠릿 공장 가격을 채우는 MXD6 수지 과립

긴 유리 섬유 화합물 펠릿 공장 가격을 채우는 MXD6 수지 과립